Parameters: rated current: 12a voltage: 110v power: 2.6Kw the quantity of molds: 4 machine size 20.8*13.7*38.5Inch weight 62.9Kg 138.6Lbs cone size: 2.3 *5.1 *0.11 60*130*3Mm the quantity of molds 0- 300 degree centigrade how to use 1 check and clean up the machine to make sure there are no foreign bodies before use. 2 On 110v power supply close the machine power master switch on the right side. 3 Turn right to stop switch the power indicator red on . 4 Adjust the thermostat preset temperature on the mould. The green indicator is for heating while the red is for power-off protection and reaching the specified temperature 5 press the down key to test the machine. In order to adjust the pizza crust thickness let the above mold down to the bottom until touch the limit switch on the left side and stop the machine. 6 Display time controller shows the molding time. The above mold automatically rise back to the original position. After checked above put kneaded dough evenly into the below mold start the machine to begin pizza cone production. Note: if there are some questions using the machine please contact us. For better results it is recommended to buy with rotational pizza oven. Item included 153201 : techtongda pizza cone spiral shape forming machine 110v
Brand: TECHTONGDA
