Description: this machine is mainly used for cylindrical conical type products such as large and medium-sized plastic drums iron oil drums stainless steel drums garbage cans etc. It can also be used for conical barrels etc. Drums 30 to 80 centimeters 12 to 31 inches in diameter can be used. Printing pattern width left and right within 60 cm 24 inches the printed pattern is within 50 cm 20 inches in length front and back . Parameters diameter of suitable cylindrical and conical products: 12-31inch height adjustable range of the screen frame: 7.9Inch distance between the squeegee and the frame clamp: 13-24inch height of the holding wheels: 6inch distance between the printed products holding racks: 6-18inch length of the two rods for locating substrates: 18inch distance range between the two rods for locating substrates: 10-53inch instructions 1.The screen plate front and back push-pull structure one hand press down the squeegee rack the other hand pull the screen frame to complete the printing. 2.Double height adjustment structure to suit printing of different diameters. 3.The rear main frame is manually fine-tuned height with a maximum adjustment distance of 20cm. Loosen the connecting bolts of the main frame and adjust the lifting handle by hand . After reaching the appropriate height tighten the connecting bolts of the main frame to complete the height adjustment. 4.The substrate support rack manually fine adjustment height the maximum adjustment distance is 15 cm loosen...
Brand: TECHTONGDA
